Spindle, 10K Grease Pack, Locking Drawbar, New

FADAL TYPE  SPINDLES FROM ITSCNC.COM 

ITS offers a new Fadal Grease Pack Spindle suitable for any Fadal Machine that uses Grease Pack type Spindles.  Our Spindles come complete with the Drawbar installed. The New Fadal Grease Pack Spindle has a polished housing.  The Spindle is one of the most important aspects of the machine and the ITS version, Fadal Spindle willl last a long time if installed and maintained correctly.

Product Specification 

• - ITS Part Number SPN-0336-ITS
• - Typically used in Fadal, 10,000 RPM Machines with Locking Drawbar and
     7500 RPM Machines with Non-Locking Drawbar.
• - NSK Bearings, rated on the Low End at 8000 RPM and the High End at 12,000 RPM.
    Note: The housing is marked 8000 RPM. This does not mean it is an 8000 RPM Spindle. It means it is the maximum RPM it can run at 100% Duty Cycle. When running over 8000 RPM the Spindle needs to be cooled for 20 minutes after 5 hours of continuous use.
• - Polished Housing with Dual Air Ports.
• - Precision Ground and Hardened Shaft.      
• - Suitable to use with any Fadal Machine that has uses Grease Pack.
• - ITS includes a Fitting/O-Ring kit with all of our Spindles.
• - For 15,000 RPM Spindles order SPN-0006.

Complete Spindle Support Solution

Complete Spindle Support Solution 

Professional Diagnose: We offer tech support to determine whether your spindle needs to be replaced, or if there are any other issues or concerns.

Instruction Manual: We provide an instruction manual containing brief and simple step by step instructions of the installation procedure of the Spindle . The document also contains Preventative Maintenance tips that will help to avoid future failures and allow the Fadal Spindle to run long.

Warranty: 

All ITS Spindles have a One Year Limited Warranty. Grease Pack will run a long time as long as the spindle is not over duty cycle and has dow frost chilling it. The premature failure of any spindle caused by customer misuse may result in a repair charge but we usally will never void the warranty entirely. The repair cost is typically $1200.00 to $1500.00.

Support Service: Along with our Fadal engineering background and direct interaction with our Spindle Engineers, we will provide you the best product support service not only at the time of installation, but after too.

Here's some more useful information on our Spindles.

Click Here for the Installation Guide.
Click Here for Spindle Failure Causes.
Click Here for Spindle Warranty Warnings.