"> FADAL: DC Brush, AMP-0006 for FADAL VMC15 by ITS
Menu ItsCnc.com

 

Independent Technology Service Inc.

Your Fadal Machine Parts & Repair Depot

Call Us : 800-342-3475 (818-727-1500)



AC, DC Axis Amplifiers

"ITS" DC Brush, Short Protected, XYZAB Axis Ampifier
  • "ITS" DC Brush, Short Protected, XYZAB Axis Ampifier
  • "ITS" DC Brush, Short Protected, XYZAB Axis Ampifier
  • "ITS" DC Brush, Short Protected, XYZAB Axis Ampifier

"ITS" DC Brush, Short Protected, XYZAB Axis Ampifier

Part number: AMP-0006-ITS

In Stock, Ships Today by 4pm PST
New Price: $665.00
Repair Price:$350.00
Quantity:

You can remove this item later
if you would like.

NEW 2014 AMP-0006-ITS DC Amplifier
Designed For Maximum Performance and Reliability   

     

New and Unique Benefits: 

1.) Motor Short Protection

2.) Better Fault Management

3.) 2x Faster Servo Response

4.) Full Protection Cover


 




NEW - Motor Short Protection

Engineered for maximum performance and reliability, features such as Motor Short Protection. Our special Motor Short Protection provides additional protection when a motor or wiring becomes shorted. 

With other amplifiers, a motor short typically destroys the output devices or melts circuit board traces, permanently damaging unprotected amplifiers. Our goal is to provide an amplifier that not only performers better but also lasts longer!

NEW - Faster Servo Response

The servo loop is 2x faster which provides better servo accuracy during motion and 2x the zero speed stiffness for more consistent positioning and backlash adjustments.

NEW - Better FAULT Management

We designed better current output conditions in three stages: continuous, peak, and fold back modes. Rather than just shutting down the amplifier after a 3 second peak current output, this amplifier automatically folds back to continuous motor output.

Other amplifiers never indicate when the amplifier is in the PEAK output; they simply shut down and light the Fault LED. This leaves you to wonder if a heavy cut was causing a fault or the amp/motor was faulty. Rather than just lighting an LED when the amplifier is in a FAULT mode, we added better functionality to help with diagnostics:

A).The FAULT LED lights up when the amplifier exceeds the continuous duty cycle to indicate starting the 3 sec 200% PEAK current output. After 3 seconds, the amplifier folds back to the 100% continuous output rating.
B).The LED goes OFF while in the continuous rating and the 3 second Peak output capability is restored.
C).The Fault signal goes LOW only when the amplifier is actually Faulted (unable to output power) or the motor/wires are shorted.

NEW - Protective Cover

For added protection we've covered the amplifier to help protect the electronics from handling and also shield it from stray chips that can end up in the electrical cabinet.  After years of repairing amplifiers, we found many problems associated with conductive shorts.    

  

AMP-0006-ITS SPECS:

Works with all VMC 15 machines or all axis (XYZAB) using the smaller amplifier footprint with the orange or green WAGO connector. 

       
Used With Motors:

MTR-0002
MTR-0003
MTR-0125

Replaces Amplifiers: 

AMC AMP-0014 (40ACNH2)
GLENTEK AMP-0006 (SMA7377-1) 
All Competitors Knockoff's.

          

Total Engineering Support!

With us you're not just getting a "Part In A Box!"
Here's four key examples of the Total Support our customers receive:

Diagnoses:
Direct help in determining if you really do need to replace the amplifier. When working with engineers that design the machine, we can help determine if there's other elements in the servo system that also need to be addressed before replacing an amplifier.

Documentation:
We provide very simple and concise, step by step instructions on how to install and get your replacement amplifier in and running. With our documentation we also include Preventative Maintenance tips to help avoid future failures.     

Support:
With the combination of our engineering background and direct interaction with both Glentek and AMC engineers, you are getting the absolute best product support possible at installation and beyond.
The axis amplifiers are one of the most important aspects of the machine. Why buy something from someone without the engineering experience and the manufacturer's direct support?       

New 12 Month Warranty:
Just like "the old days", we value our relationship with each and every customer. We are driven by fairness and committed to your satisfaction.



There are currently no product reviews.
Back Write Review


Your request has been successfully sent, we will contact you as soon as possible




Shipping Cost

 
Zip Code:
 

Amp Repair Products

In order to repair this part, choose one of the options below to start the repair process.
1) If you would like to start the RMA (Return Material Authorization) process now, Click Here.
2) If you would like more information on Amplifier Repair, Click Here

" Check Out Related Products "